WHD400-AF15 Indoor 4.0MP AHD Camera 2 In 1 Output Analog Camera System
WODSEE is one of the best WHD400-AF15 Outdoor Fixed Lens 4.0MP Nextchip AHD Camera with DWDR and OSD manufacturers and suppliers and we have one of the famous brands. You can buy or wholesale high quality and newest products with CE certification from our factory.WIPH-MD25…
Product Details
WHD400-AF15 Indoor 4.0MP AHD Camera 2 in 1 output Analog Camera System
Features:
1. Image sensor OV4689, Effective resolution is up to 2688*1520;
2. OSD menu supports 12 different languages; with strong light inhibition/Mirror/BLC/DPC, 2D noise reduction function;
3. Adopt Nextchip NVP2475H DSP, with OSD function (mirror image, color/ white-black, PAL/NTSC);
4. AGC type, day-night effect is distinct, various day-night modes can be switched by OSD menu Support D-WDR;
5. Support UTC, output 4MP, switched by OSD, Enhancement adjustment supported by OSD.
Scenarios：
Apply to roads, warehouses, underground parking and other place which required definition picture quality.
Specifications:
|
Model |
WHD400-AF15 |
|
Processor+sensor |
Nextchip2475 + 1/3" OV4689 |
|
Signal System |
4.0M pixels |
|
Effective Picture Elements |
2688 (H) × 1520 (V) |
|
Minimum Illumination |
Color: 0.01Lux @(F1.2,AGC ON),0 LUX with IR |
|
B&W: 0.001 Lux @ (F1.2,AGC ON),0 LUX with IR |
|
|
S/N Ratio |
More than 69dB |
|
Scanning System |
2:1 interface |
|
Synchronous System |
Internal, Negative sync. |
|
Auto Electronic Shutter |
1/50(1/60)S-1/100,000S |
|
Gama Characteristic |
0.45 |
|
Day and Night Function |
Support IR-CUT |
|
IR Distance |
15m |
|
IR Status |
Under 10Lux by CDS |
|
IR Power On |
CDS AUTO Control |
|
Video Output |
1Vp-p Composite Output(75Ω/BNC） |
|
Auto Gain Control |
Auto |
|
Power/Current |
DC12V/450mA ±10% |
|
Lens |
3.6mm Fixed lens |
|
Dimension (mm) |
￠111×84(H)mm |
|
Storage Temperature |
-30~+60℃ RH95% MAX |
|
Operating Temperature |
-10~+60℃ RH95% MAX |
WODSEE NEWS:
New 5MP IP Camera solution: HiSilicon3516A+ Omnivision OS05A10
On Aug.18, 2017, Wodsee release new 5MP IP Camera solution: HiSilicon3516A+ Omnivision OS05A10, which is to replace Hi3516A+OV5658.
Omnivision OS05A10 is new released versatile 5-Megapixel PureCel® Sensor with High Dynamic Range for a Wide Range of Commercial Security and Consumer Applications by OmniVision.
Details please visit http://www.ovt.com/sensors/OS05A10
Why Wodsee new release Hi3516A+ OS05A10 ?
Please check below Advantages:
1. Sensor size: OS05A10 Big
1/2.7” OVOS05A10 COMS Sensor, image will be more clear and lifelike.
1/3” OV5658 CMOS Sensor
2. TF card: OS05A10 up to 128G
OVOS05A10 Sensor, add TF Card slot, max support 128G TF card
OV5658 Sensor, add TF Card slot, max support 32G TF card
3. The Number of CCD Board Layer: OS05A10 only 1 layer
OVOS05A10, match with DSP Hi3516A/Hi3516D, only 1 layer of CCD board.
With Motorized zoom lens, only 1 layer, too.
Small case/housing is also available with 5MP High Megapixel.
OV5658 Sensor, match with DSP Hi3516A/Hi3516D, 2 layers of CCD board.
With Motorized zoom lens, only big Dome and Bullet camera case/housing are available.
4. Image quality: OS05A10 color image, more clear; Balck&White image, more clear; support HDR function
OS05A10 color:
OS05A10 black & white:
OS05A10 WDR/HDR on and off:
OV5658 color:
OV5658 black&white:
FAQ:
1. How to install Network video surveillance system front-end equipment?
Network video surveillance system system front-end equipment installation needs to be specific for different equipment, in the installation before carefully read the product manual and installation requirements. The standard steps for installing the terminal device are as follows:
1) Unpacking confirm the completeness of the equipment listed in the product description.
2) Check the power supply voltage to prevent the equipment does not match the equipment damage.
3) to confirm whether the equipment working environment in line with the product manual on the equipment operating temperature, power and other environmental
begging.
4)control equipment manual power test, to confirm a variety of working status indicator to normal operation
2. How to choose a infrared camera?
Infrared camera is mainly used for the target needs day and night surveillance, with special emphasis on the need to monitor the night, and the target environment is not too strong light scene conditions. The specific choice based mainly on the camera and the target before the distance, the general distance of the infrared camera range of 20-100 meters, the farther away from the price the more expensive, while power consumption is also large.
In addition, the choice of infrared camera should consider the infrared light power switch control problems. This problem can be used both manual and automatic control.
3. How can I upgrade the DVR's firmware?
Provide the current version of your device,and contact the technician providing the latest upgrade firmware.
4.How many hours of video can the Security DVR store?
The length of archive depends on number of cameras, frames per second (FPS) and amount of available hard disk space.?
5.How does motion detection work? Through the camera or software?
Motion detection works through the software in the DVR system by recording video when pixels in the image change. Most Security DVRs offer a sensitivity scale so the user can set the sensitivity of the motion detection.
WODSEE is one of the best WHD400-AF15 Indoor 4.0MP AHD Camera 2 in 1 output Analog Camera System manufacturers and suppliers and we have one of the famous brands. You can buy or wholesale high quality and newest products with CE certification from our factory.
