Cctv Camera For Home Motion Detection

Network camera Features :

1/2.8″ Hi3516CV300+SONY290 CMOS sensor 2.0mp 1080P@25fps, Starvis

Package:60pcs/carton (carton size: 59cm×38.5cm×40cm)

Compatible with Hikvision Private Protocol

Smart Low Illumination; Smart ROI(4 ROI region)

Free P2P; ONVIF2.4; BLC; 3D-DNR; DEFOG; DWDR

Support auto IR-CUT filter removal function/ICR

Support: Milestone, NUUO, AXXON, igifort,avigilon

Scenarios：

Apply to roads, warehouses, underground parking and other place which required definition picture quality.

Specification:

Company News:

Wodsee motorized zoom lens IP cameras

As we known, Wodsee motorized zoom IP camera is 2.8-12mm lens. But now it has upgraded to 2.7mm-13.5mm motorized zoom lens. That is 5X zoom lens. It is more super than before. Now let us introduce wodsee new motorized zoom network cctv cameras.

The solution and the Motorized Zoom lens

Optional function:

1.Audio in&out ; 2. Alarm in&out  3. SD card slot  4. Internal POE  5. Wifi function.

Great compatibility of plenty protocol, the third software and Brand NVR.

Support Brand NVR

*Hikvision protocol: support Hikvision private agreement, support Hikvision full range of H.264, H.265 NVR, support Hikvision POE series NVR ( plug and play), support Hikvision iVMS4200 monitoring platform software;

*Dahua protocol: support Dahua private agreement, support Dahua full range of H.264, H.265 NVR, support Dahua POE series NVR (plug and play), support Dahua cms monitoring platform software;

*Xmeye protocol: support Xmeye private agreement, support Xmeye full range of H.264, H.265 NVR, support Xmeye POE series NVR (plug and play), support Xmeye cms monitoring platform software;

Additional functions

1.Intelligent enhancements software features

Smart block: setting the intelligent block open, when someone malicious shelter lens or by trees, debris and other occasional occlusion, it will touch the camera alarm, so that the relevant staff can detect dangerous situations in time to prevent the occurrence of the accident;

2.Intelligent control: setting alarm on / off, clear the alarm. While setting the smart low, to protect the environment in the low light can get better quality, more smooth quality.

3.Intelligent out of focus: setting the smart out of focus open, when the lens produces a virtual situation, it will touch the camera to produce an alarm, so that the relevant staff can detect and deal with failure.

4.Intelligent cross-border detection: set a limit area in the monitoring range, when the object crossed the boundaries will trigger the alarm. For example, in a road monitoring, you can set a boundary across the road, when a vehicle or pedestrian crossing the set boundaries will trigger the alarm.

5.Intelligent Remnant Detection: Select an area that triggers an alarm when a remnant is detected. For example, in a taxi, in the mall, when found to have customers remnants, can quickly find and promptly notify customers to reduce losses;

6.Smart Zone Intrusion: Set an area within the scope of the monitoring, and an alarm is triggered when an object intrudes. For example, in the warehouse important commodity location, set up a region, when someone entered the set area will trigger the alarm.

For more details,please feel free to contact info@wodsee.com.

FAQ:

1.Will broadband users add new network video surveillance system to re-apply for a new line? Can you use existing physics? line?

Under normal circumstances, network video surveillance system and other services can share the same access network lines. Apply for new network video surveillance system does not need to apply for a new line, the use of the original line can use the network video surveillance system. But if the original VPN and other special lines, according to the local network to do a specific analysis of the situation, but from the purely technical, as long as the network to increase the allocation of resources, new users can still do not increase the use of network video Monitor the business of the system.

2.How does the network video surveillance system support alarm linkage and video recording at the same time?

Alarm linkage in general can be divided into front-end alarm linkage, platform alarm linkage, the client alarm linkage. Alarm event triggered by the sound, light, electricity and other alarm output device in the front of the direct output of the alarm message can also trigger the front of the alarm video; platform to receive alarm information can trigger the platform after the alarm linkage: send the alarm message and customer mail, linkage Center video; client received an alarm signal can be immediately reflected in the client’s interface to the customer that an alarm event occurred.

3.There are several ways to see the video.There are three ways:

1. C/S (client/server) architecture: the remote PC installed on the client software, each client software directly access the front of the video server or network camera. As if in the local installation of personal version of the virus protection equipment, or that is the manufacturer of direct sales model

2. B/S (browser/server) architecture: in the remote PC does not need to install any client software, only need to have an IE browser, each client access is set up in the specified location of the server, through the visit server image. As if the remote server installed in the local anti-virus software client. Or that is the agent sales model.

3. Brower mode:directly through IE access front-end video server or network camera. As if you were online through the virus for online protection. Or that is through the network for online sales model.

4.How do I estimate the storage size?

Choosing the right storage for a video monitoring solution, you first need to estimate the storage capacity requirements. According to the current mainstream compression method is calculated as follows:

H.264 compression: 720P resolution, real-time 25 frames 33G/day

H.264 compression: D1 resolution, real-time 25 frames, 16.2G/day

H.264 compression: HAFL D1 clarity, real-time 25 frames, 300M/hour/channel;

H.264 compression: CIF resolution, real-time 25 frames, 200M/hour/channel;

The following is the video frequency and the storage time to measure the video data storage capacity;

From this table we can basically estimate the type of device that needs to store image resolution in a video surveillance project. For example, a bank needs a D1 video surveillance system, 7 * 24 hours monitoring, data storage can be covered for 3 months, then the total capacity requirements of 1.1TB.

It is possible to use a fixed rate frame frame storage technique, such as a 25-frame/S video file for one month, to reduce it to 15 frames / S without affecting the recording of the recorded information. This can save a lot of storage space.

WODSEE is one of the best WIPS20-AA25 IP Surveillance Camera IP Camera App support Starvis H.265/H.264 IP Camera manufacturers and suppliers and we have one of the famous brands. You can buy or wholesale high quality and newest products with CE certification from our factory.